1. DSpace at Nirma University
  2. 02. Institute of Technology
  3. Mechanical Engineering Department
  4. Dissertation, ME (CAD/CAM)
Please use this identifier to cite or link to this item: http://10.1.7.192:80/jspui/handle/123456789/10561
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPatel, Pundrik N.-
dc.date.accessioned2022-01-29T05:26:17Z-
dc.date.available2022-01-29T05:26:17Z-
dc.date.issued2021-06-01-
dc.identifier.urihttp://10.1.7.192:80/jspui/handle/123456789/10561-
dc.description.abstractThis project is an attempt to design and test a medicine pill dispenser which can be controlled via the internet, to be used in pharmacies. This device is designed to assist the pharmacist to dispense the correct medication in the correct dose in a timely manner. An initial design and some variations based on a modification of a chicaning conveyor were tested via motion simulations and finally a proof of concept is fabricated.en_US
dc.publisherInstitute of Technologyen_US
dc.relation.ispartofseries19MMCC10;-
dc.subjectMechanical 2019en_US
dc.subjectProject Reporten_US
dc.subjectProject Report 2019en_US
dc.subjectMechanical Project Reporten_US
dc.subject19MEEen_US
dc.subject19MMCCen_US
dc.subject19MMCC10en_US
dc.subjectCAD/CAMen_US
dc.subjectCAD/CAM 2019en_US
dc.subjectMedicineen_US
dc.subjectTableten_US
dc.subjectPillen_US
dc.subjectDispenseren_US
dc.titleDesign and Development of Medicine Dispensing Machineen_US
dc.typeDissertationen_US
Appears in Collections:Dissertation, ME (CAD/CAM)

Files in This Item:
File Description SizeFormat 
19MMCC10.pdf19MMCC103.62 MBAdobe PDFThumbnail
View/Open
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.