Please use this identifier to cite or link to this item: http://10.1.7.192:80/jspui/handle/123456789/11299
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPrajapati, Darshil-
dc.date.accessioned2022-09-29T07:47:55Z-
dc.date.available2022-09-29T07:47:55Z-
dc.date.issued2022-06-01-
dc.identifier.urihttp://10.1.7.192:80/jspui/handle/123456789/11299-
dc.description.abstractTextile manufacturing industry uses substantial amount of chemicals not only in the production processes but also in manufacturing the raw materials. Chemicals used in textile production are generally classified as commodity chemicals and speciality chemicals. The former in utilized in Bulk also the latter is utilized in little amounts. Caustic Soda (Sodium Hydroxide) is one of the significant synthetics which are utilized in enormous amounts for delivering cotton materials. Caustic soda result in highly alkaline waste water from the textile mills which makes the effluent toxic and poses difficulty in treatment of effluent. This report to survey the recovery of caustic soda from the mercerization plant was directed in a cotton texture producing unit. So, we designed the recovery plant which is recovery the caustic soda from the wastewater generated from the mercerization process. A Caustic Recovery Plant is typically a triple effect evaporation plant which will re-concentrate the weak lye by heating it in the heat exchanger and when it reaches evaporator, the vapor is released due to water evaporation that increases its concentration. This process repeats itself by circulation in caustic recovery plant till the desired concentration is reached. So, we designed the various vessels such as Flash vessels, Evaporators, condenser and pre-heaters as per ASME boiler and pressure vessel code section II PART D. Also make a solid model of all vessels in 3d modeling software such as solidworks and solid edge. After we done the finite element analysis of pressure vessel and match with the manual calculation when it’s satisfactory our FEA result then we fabricate and manufactured the all of the vessels.en_US
dc.publisherInstitute of Technologyen_US
dc.subjectMechanical 2020en_US
dc.subjectProject Reporten_US
dc.subjectProject Report 2020en_US
dc.subjectMechanical Project Reporten_US
dc.subject20MMEen_US
dc.subject20MMCCen_US
dc.subject20MMCC12en_US
dc.subjectPressure Vessel Designen_US
dc.subjectFlash Vesselen_US
dc.subjectEvaporatorsen_US
dc.subject3d-Modelen_US
dc.subjectSolid Works Softwareen_US
dc.subjectFEAen_US
dc.subjectFabricationen_US
dc.subjectManufacturingen_US
dc.subjectCAD/CAMen_US
dc.subjectCAD/CAM 2020en_US
dc.titleDesign of Caustic Recovery Planten_US
dc.typeDissertationen_US
Appears in Collections:Dissertation, ME (CAD/CAM)

Files in This Item:
File Description SizeFormat 
20MMCC12.pdf20MMCC127.81 MBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.