Please use this identifier to cite or link to this item: http://10.1.7.192:80/jspui/handle/123456789/3760
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPujara, D. A.-
dc.contributor.authorChakrabarty, S. B.-
dc.date.accessioned2012-10-23T06:37:13Z-
dc.date.available2012-10-23T06:37:13Z-
dc.date.issued2012-07-
dc.identifier.urihttp://10.1.7.181:1900/jspui/123456789/3760-
dc.descriptionIETE Journal of Research, Vol. 58 (4)August 2012, Page No. 317-321en_US
dc.description.abstractThis paper presents the design and the experimental results of a dual‑mode rectangular‑matched feed. This type of feed cancels the unwanted high cross‑polarization generated by the offset parabolic reflector antenna. In order to design this feed, higher order TE11 mode has been added in correct amplitude and phase with the fundamental TE01 mode in a rectangular structure. The proposed feed was then used as a primary feed to illuminate a linearly polarized offset parabolic reflector antenna. Through experimental results, it is verified that such a feed suppresses the undesired high cross‑polarization introduced by the offset geometry of an offset reflector antenna. This kind of feed is very much suitable for monopulse tracking radar.en_US
dc.publisherIETEen_US
dc.relation.ispartofseriesITFEC005-17en_US
dc.subjectCross‑Polarizationen_US
dc.subjectMatched Feeden_US
dc.subjectMonopulse Tracking Radaren_US
dc.subjectOffset Parabolic Reflector Antennaen_US
dc.subjectReturn‑Lossen_US
dc.subjectEC Faculty Paperen_US
dc.subjectFaculty Paperen_US
dc.subjectITFEC005en_US
dc.titleCancellation of High Cross-Polarization of an Offset Parabolic Reflector Antenna using a Rectangular Matched Feeden_US
dc.typeFaculty Papersen_US
Appears in Collections:Faculty Papers, EC

Files in This Item:
File Description SizeFormat 
ITFEC005-17.pdfITFEC005-171.14 MBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.