1. DSpace at Nirma University
  2. 02. Institute of Technology
  3. Electrical Engineering Department
  4. Dissertation, EE (PEMD)
Please use this identifier to cite or link to this item: http://10.1.7.192:80/jspui/handle/123456789/8904
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPatel, Jay Nalinbhai-
dc.date.accessioned2019-09-27T10:06:57Z-
dc.date.available2019-09-27T10:06:57Z-
dc.date.issued2018-06-01-
dc.identifier.urihttp://10.1.7.192:80/jspui/handle/123456789/8904-
dc.description.abstractIn this project, simple, low cost, reduce number of switches three phase AC-DC buck- boost converter is presented. Converter is suitable for broad range of DC output voltages. The working of capacitive input filters in both buck and boost mode of converter are discussed and design of input and output parameters of converter is present. The simulation will be carried out in MATLAB Simulink software and the fabrication of hardware for the converter will be carried output and results of simulation compared with hardware.en_US
dc.publisherInstitute of Technologyen_US
dc.relation.ispartofseries15MEEP14;-
dc.subjectElectrical 2016en_US
dc.subjectProject Report 2016en_US
dc.subjectElectrical Project Reporten_US
dc.subjectProject Reporten_US
dc.subjectEC (PEMD)en_US
dc.subjectPower Electronics, Machines & Drivesen_US
dc.subject16MEEen_US
dc.subject16MEEPen_US
dc.subject15MEEP14en_US
dc.subjectPEMDen_US
dc.subjectPEMD 2016en_US
dc.titleDesign and Development of Buck Boost Converteren_US
dc.typeDissertationen_US
Appears in Collections:Dissertation, EE (PEMD)

Files in This Item:
File Description SizeFormat 
15MEEP14.pdf15MEEP1420.38 MBAdobe PDFThumbnail
View/Open
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.