1. DSpace at Nirma University
  2. 02. Institute of Technology
  3. Mechanical Engineering Department

Faculty Paper, ME : [190] Collection home page

Browse
Subscribe to this collection to receive daily e-mail notification of new additions RSS Feed RSS Feed RSS Feed
Collection's Items (Sorted by Submit Date in Descending order): 1 to 20 of 190
 next >
PreviewIssue DateTitleAuthor(s)
RPP_IT_2021_047.pdf.jpg2021Optimal configuration of solar and wind-based hybrid renewable energy system with and without energy storage including environmental and social criteria: A case studyMemon, Shebaz A.; Upadhyay, Darshit S.; Patel, Rajesh N.
RPP_IT_2021_042.pdf.jpg2021Microfluidic analysis of seawater-based CO2 capture in an amine solution with nickel nanoparticle catalystsRatanpara, Abhishek; Shaw, Alexander; Thomas, Mallory; Patel, Rajesh N.; Kim, Myeongsub
RPP_IT_2021_039.pdf.jpg2021An overview of optimization techniques used for sizing of hybrid renewable energy systemsMemon, Shebaz A; Rajesh N. Patel, Rajesh N.
RPP_IT_2021_038.pdf.jpg2021Enhancement of travel range of electrostatically driven fixed-fixed micro beam in static and dynamic mode using mutated particle swarm optimizationTrivedi, R. R.; .Pawaskar, D. N.; Shimpi, R. P.
RPP_IT_2021_006.pdf.jpg2021Analysis of solar still integrated with phase change material and pin fins as absorbing materialLakhera, Vikash J.
RPP_IT_2022_009.pdf.jpg2022Experimental Study On Nucleate Pool-Boiling Heat Transfer of R141b Over Plain and Micro-Finned Cylindrical Surfaces at Different PressuresShah, B. A.; Shah, Kathit; Lakhera, Vikas J.
RPP_IT_2022_001.pdf.jpg2022Experimental investigations on nucleate pool boiling over micro-finned cylindrical surfacesShah, Balkrushna; Shah, Kathit; Patel, Parth; Lakhera, Vikas J
ITFME044-10.pdf.jpg2016Investigation to Study the Applicability of Solid Lubricants in Machining for Clean and Green ManufacturingMakhesana, M. A.; Patel, K. M.
ITFME044-9.pdf.jpg19-Dec-2016An Investigation On Effects Of Machining Parameters In Turning With The Use Of Minimum Quantity Lubrication And Solid LubricantsMakhesana, M. A.; Patel, K. M.
ITFME044-8.pdf.jpg16-Dec-2016Improvement in Machining Process Performance with the Application of Solid LubricantsMakhesana, M. A.; Patel, K. M.
ITFME065-1.pdf.jpg16-Dec-2016Performance Assessment of Use of Solid Lubricants as Cooling Method in Machining ProcessPatel, Anand; Patel, K. M.; Makhesana, M. A.
ITFME030-9.pdf.jpg26-Nov-2015Identification of Energy Saving Potential of Different Thermal Insulation through Mathematical ModellingMattoo, Somakshi; Shah, Balkrushna A.; Lakdawala, A. M.
ITFME030-8.pdf.jpg26-Nov-2015Experimental Investigation And Analysis On A Concentrating Solar Collector Using Linear Fresnel LensDheela, N. A.; Shah, Balkrushna A.; Jain, S. V.
ITFME030-7.pdf.jpg26-Nov-2015Economic Analysis Of Heat Pump Integrated Ice Cream Making PlantPatel, Kalpan; Sarda, Dilip; Shah, Balkrushna
ITFME044-7.pdf.jpg26-Nov-2015Performance Assesmnet and Selection of Solid Lubricants For Environmentally Benign Lubrication in MachiningPatel, M. H.; Makhesana, M. A.; Patel, K. M.
ITFME044-6.pdf.jpg2015Application of Improved Complex Proportional Assessment (COPRAS) Method for Rapid Prototyping System SelectionMakhesana, M. A.
ITFME025-8.pdf.jpg3-Oct-2015Stresses Around Elliptical/Oval Shaped Hole In Finite Laminated PlateChauhan, Mihir; Dave, Jatin; Sharma, Dharmendra
ITFME025-7.pdf.jpg2013Stress Distribution Around Oval Shaped Hole In Finite Laminated Plate Subjected To In-Plane LoadingChauhan, Mihir; Sharma, Dharmendra
ITFME025-6.pdf.jpg10-Dec-2012Stress Distribution around Oval Shaped Hole in Infinite Composite PlateChauhan, Mihir; Sharma, Dharmendra; Dave, Jatin
ITFME025-5.pdf.jpg10-Dec-2012Failure Strength of Orthotropic Lamina with Various Shaped CutoutsChauhan, Mihir; Sharma, Dharmendra; Dave, Jatin
Collection's Items (Sorted by Submit Date in Descending order): 1 to 20 of 190
 next >

Discover